1. Cleaning and maintenance of the frame
When cleaning the frame, you can dip a rag into water and pour it on the components. This way, the mud stuck under the frame will become soft after encountering water. At this time, you can easily remove the mud by wiping with a rag.
2. Cleaning and maintenance of wheel set, headstock and sitting tube
When washing the wheel set, you can choose to use a shoe brush dipped in detergent to brush the sand on the outer tire. When washing the rim, it is better to replace it with a rag with detergent, and carefully wipe the brake pad brake area on the rim. Simple scrubbing of spokes is OK.
3. Cleaning and maintenance of dial, forward dial and backward dial
When cleaning the dial, just wipe it gently with a rag. Because the interior of the dial parts is complex, too fine cleaning can easily lead to failures. When washing the front and back paddles, you can directly aim the water pipe at the gap between the front and back paddles to flush with water, so that the sediment stuck in the front and back paddles can be washed away.
4. Cleaning and maintenance of front fork, pedal and brake
The cleaning of the front fork and foot pedal is very simple, as long as the mud and water are washed away. The brake can be cleaned with a brush to remove dust and small dirt. If there is oil residue, you can use a cotton swab dipped in detergent for cleaning, and then gently wipe it off with a wet rag.
5. Cleaning and maintenance of dental disc, flywheel and chain
The cleaning and maintenance of the dental disc, flywheel and chain are complicated, because these three parts are often dirty and there is a lot of lubricating oil. We can pour some detergent on the dishcloth first, dip it in water, and then clean the dental plate. The flywheel is generally disassembled for cleaning, and the chain can be carefully cleaned with detergent. Note that clean lubricating oil shall be applied to these three parts after cleaning.
